MyGeotab agent skills for Claude Code, Cursor and RevampKey

5 ready-made playbooks that teach an AI agent how to do real MyGeotab work: which tools to call, what to check first, and when to stop and ask you.

Download RevampKey, free I have it: connect MyGeotab

Connect MyGeotab once and all 5 skills install themselves and stay up to date. Mac, Windows and Linux.

All 5 MyGeotab skills

Each skill is one job. You ask in plain words and the agent loads the skill that matches, then follows its steps.

Start hereAsks before writing20 MyGeotab tools

Use the MyGeotab connector safely

Shows how to connect to MyGeotab, confirm the database and account, pick the right read tool and keep results manageable. The assistant asks for your explicit approval before any change to fleet records.

Use it when

You have just connected MyGeotab and want to know what it can do
You need a quick count of vehicles or devices before pulling the full list
You are about to add, change or dismiss something in MyGeotab

Tools it uses

GetCountOf
GetEntity
Get
ListEntities
GetDevicesInformation
GetHosRuleSets
GetEmissionComplianceDeadline
GetPostedRoadSpeedsForDevice
DecodeVins
GetAceResults
GetSkill
Add
Set
Remove
DismissFaults
EmissionEnrollDevices
UploadMediaFile
SubmitFeedback
GetMediaUrl
DownloadMediaFile

Example

How many active vehicles are in our main database? Count them first, don't list them yet.

The main database holds 214 active vehicles. I have not listed them yet, so I can show a summary by group or pull a page of 25 whenever you like. Confirm the database name first if you have access to more than one.

Use in RevampKeyRead the full skill →

Asks before writing6 MyGeotab tools

Fleet vehicle health triage for MyGeotab

Works through active faults and device status across your Geotab fleet to rank which vehicles need attention now and which can wait. It proposes fault dismissals for your review and applies none without your approval.

Use it when

A morning check on which trucks need attention today
Deciding whether a cluster of faults is one incident or many
Finding stale or duplicate faults that can be cleared after review

Tools it uses

GetCountOf
GetDevicesInformation
Get
ListEntities
GetEntity
DismissFaults

Example

Which vehicles in the north depot need attention today?

I checked 84 vehicles in the North depot and found 9 active faults. 2 are urgent: truck 117 has a repeated brake-system warning over 3 days, and truck 042 shows low oil pressure with its device online. 4 need attention soon, and 3 look like stale duplicates from a device that stopped reporting last week. I haven't dismissed anything. Should I list the 3 duplicates for your approval?

Use in RevampKeyRead the full skill →

Asks before writing9 MyGeotab tools

Review hours-of-service and emissions compliance

Checks driver hours against your MyGeotab rule sets and emissions deadlines, finds vehicles and drivers at risk of a violation, and reports coverage gaps. Read-only: it asks before enrolling devices or changing rules.

Use it when

You need to know which drivers are close to their hours limit before the next shift.
You are preparing for a compliance audit and want uncovered vehicles found first.
An emissions deadline is approaching and you need to know which devices are not yet enrolled.

Tools it uses

GetHosRuleSets
GetEmissionComplianceDeadline
ListEntities
GetCountOf
Get
GetEntity
EmissionEnrollDevices
Set
DismissFaults

Example

Which drivers are close to their HOS limit this week, and are any vehicles missing a rule set?

Coverage: 47 active vehicles, 45 covered, 2 with no HOS rule set (Truck 12 and Van 3). Over: none this period. Within buffer: 4 drivers within an hour of their daily limit, starting with J. Patel. Emissions: the next deadline is in 19 days and 3 of its 14 devices are not enrolled. Data is current to yesterday evening.

Use in RevampKeyRead the full skill →

Asks before writing7 MyGeotab tools

Retrieve dashcam media and posted speed data

Finds dashcam clips and posted road speed limits for a specific vehicle and time window, confirms the device and time zone first, and asks before downloading or changing anything.

Use it when

A driver incident needs the dashcam footage from a particular hour
You want the posted speed limit for a vehicle at a given timestamp
A video link is needed for an insurance or safety review

Tools it uses

ListEntities
GetEntity
SearchMedia
GetMediaUrl
DownloadMediaFile
UploadMediaFile
GetPostedRoadSpeedsForDevice

Example

Pull the dashcam clips for truck 14 between 2:10 and 2:25 pm yesterday and tell me the posted limit where it was at 2:18.

I found 3 candidate clips for truck 14 in that window, and I need to confirm the device and time zone before I fetch them: the times I used are local to your database. Clip 2 (2:16–2:19 pm) overlaps the 2:18 mark. The posted limit at that timestamp was 50 km/h, but that comes from the nearest mapped road, so please check it matches the street you expect. Nothing has been downloaded yet.

Use in RevampKeyRead the full skill →

Asks before writing8 MyGeotab tools

Audit your MyGeotab vehicle and device inventory

Reconciles the MyGeotab vehicle and device registry against your own list, finding duplicates, missing vehicles and VIN mismatches. It drafts corrections and waits for your approval before changing anything.

Use it when

Your fleet list and MyGeotab have drifted apart after vehicles were added or sold
You suspect duplicate VIN or device entries after a device swap
You want a clean discrepancy list before a registry cleanup

Tools it uses

GetCountOf
ListEntities
GetEntity
DecodeVins
GetDevicesInformation
Add
Set
Remove

Example

Audit our MyGeotab vehicles against the fleet list I'm pasting in, and tell me what's duplicated or missing.

The registry returned 412 vehicles, matching the expected count, so the audit is complete. I found 19 discrepancies: 7 duplicate VINs from re-registered devices, 9 vehicles on your list that are missing in MyGeotab, and 3 VINs that fail to decode. I've drafted 9 adds and 7 removals for your review. Nothing has been changed yet.

Use in RevampKeyRead the full skill →

Get all 5 without copying a file

RevampKey adds the skills when you connect MyGeotab, updates them for you and removes them when you disconnect.

Download RevampKey

How MyGeotab skills work

Connect MyGeotab
The MyGeotab MCP server gives the agent its tools.
Ask in plain words
“Which vehicles in the north depot need attention today?” Each SKILL.md says when it applies, so only the one that fits is loaded.
Approve any change
The agent calls the tools in order, checks its work, and shows you any change before it makes it.

How to install MyGeotab skills

In RevampKey the skills install themselves when you connect MyGeotab. In other tools each skill is one folder with a SKILL.md file, and you also need the MyGeotab MCP server connected there.

About 1 minute · nothing to copy

Download RevampKey for Mac, Windows or Linux and sign in.
Open Connectors and connect MyGeotab. All 5 skills come with it and stay up to date; they go away when you remove the connector.
Ask in plain language, for example “Which vehicles in the north depot need attention today?”
Download RevampKeyConnect MyGeotab · 1 click
Get RevampKey to connect MyGeotab
RevampKey is a free desktop app for Mac, Windows and Linux. Install it, sign in, and MyGeotab is one click away with its skills already attached.
Download RevampKey
Not now? Use the skills in your current tool
for s in essentials fleet-vehicle-health-triage hos-compliance-review media-and-speed-data-retrieval vehicle-inventory-audit; do curl -fsSL --create-dirs -o .claude/skills/mygeotab-mcp-prod-$s/SKILL.md https://revampkey.com/marketplace/mygeotab-mcp-prod/skills/$s/SKILL.md done
Other tools

Into this project’s .claude/skills folder

Connect the MyGeotab MCP server in Claude Code.

Run this in your project folder to add all 5 skills:

for s in essentials fleet-vehicle-health-triage hos-compliance-review media-and-speed-data-retrieval vehicle-inventory-audit; do
  curl -fsSL --create-dirs -o .claude/skills/mygeotab-mcp-prod-$s/SKILL.md https://revampkey.com/marketplace/mygeotab-mcp-prod/skills/$s/SKILL.md
done

Ask in plain language, for example “Which vehicles in the north depot need attention today?”

Into the shared .agents/skills folder

Connect the MyGeotab MCP server in Cursor.

Run this in your project folder to add all 5 skills:

for s in essentials fleet-vehicle-health-triage hos-compliance-review media-and-speed-data-retrieval vehicle-inventory-audit; do
  curl -fsSL --create-dirs -o .agents/skills/mygeotab-mcp-prod-$s/SKILL.md https://revampkey.com/marketplace/mygeotab-mcp-prod/skills/$s/SKILL.md
done

Ask in plain language, for example “Which vehicles in the north depot need attention today?”

Into the shared .agents/skills folder

Connect the MyGeotab MCP server in Codex.

Run this in your project folder to add all 5 skills:

for s in essentials fleet-vehicle-health-triage hos-compliance-review media-and-speed-data-retrieval vehicle-inventory-audit; do
  curl -fsSL --create-dirs -o .agents/skills/mygeotab-mcp-prod-$s/SKILL.md https://revampkey.com/marketplace/mygeotab-mcp-prod/skills/$s/SKILL.md
done

Ask in plain language, for example “Which vehicles in the north depot need attention today?”

Into the shared .agents/skills folder

Connect the MyGeotab MCP server in VS Code.

Run this in your project folder to add all 5 skills:

for s in essentials fleet-vehicle-health-triage hos-compliance-review media-and-speed-data-retrieval vehicle-inventory-audit; do
  curl -fsSL --create-dirs -o .agents/skills/mygeotab-mcp-prod-$s/SKILL.md https://revampkey.com/marketplace/mygeotab-mcp-prod/skills/$s/SKILL.md
done

Ask in plain language, for example “Which vehicles in the north depot need attention today?”

RevampKey or copy the files?

In RevampKey

One click when you connect MyGeotab
Updated for you when a skill improves
Removed when you disconnect
The MCP server is set up for you
800+ other connectors, same way

Download free

Copy into your project

One command per project
Run it again to get updates
You connect the MyGeotab MCP server yourself
Works in Claude Code, Cursor, Codex and VS Code

See the command

MyGeotab skills FAQ

What is a MyGeotab agent skill?

A SKILL.md file: a short playbook an AI agent loads when your request matches it. Each MyGeotab skill describes one job, which MyGeotab tools to use in which order, what to check first and when to stop and ask you.

Do the MyGeotab skills change anything on their own?

The others tell the agent to show you the change and wait for a yes before it creates, edits or deletes anything in MyGeotab.

Which tools can use these skills?

Any agent that reads the open Agent Skills format: Claude Code, Cursor, Codex, VS Code with Copilot and RevampKey. In RevampKey they are attached when you connect MyGeotab; elsewhere you copy the folders into your project or skills directory.

Do I need the MyGeotab MCP server too?

Yes. The skills tell the agent how to do the work; the MyGeotab MCP server gives it the tools to do it. The MyGeotab MCP setup guide covers every client.

MyGeotab MCP server setup · This page as Markdown

Put MyGeotab’s best workflows in your agent

Download RevampKey, connect MyGeotab and ask your first question in about a minute.

Download RevampKey Connect MyGeotab · 1 click

All 5 MyGeotab skills

Use the MyGeotab connector safely

Use it when

Tools it uses

Fleet vehicle health triage for MyGeotab

Use it when

Tools it uses

Review hours-of-service and emissions compliance

Use it when

Tools it uses

Retrieve dashcam media and posted speed data

Use it when

Tools it uses

Audit your MyGeotab vehicle and device inventory

Use it when

Tools it uses

Get all 5 without copying a file

How MyGeotab skills work

How to install MyGeotab skills

RevampKey or copy the files?

In RevampKey

Copy into your project

MyGeotab skills FAQ

Put MyGeotab’s best workflows in your agent

Skills for related tools